Sail Yacht Services

Captive Winches

We are experienced in servicing captive winches from multiple manufacturers such as Harken, Seaway Powell and Onboard Systems for yachts ranging from 40m to 80m with pull loads from 1.5 tonnes to 50 tonnes.

With support from the manufacturers, we ensure servicing is carried out to a factory standard.

Representing Harken and Ocean Marine Systems (OMS), two of the largest yacht cylinder manufacturers, we have the ability to service or replace any cylinder found on sail or motor yacht systems. These systems can range from 100 tonne vangs to lightweight titanium cylinders for the racing circuit.

Cylinders
Furling Systems

We offer a range of services for furling systems which includes, but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run

We carry out lifting keel maintenance such as:

  • keel lowering
  • servicing of hydraulic cylinders
  • position indicating
  • locking pins
  • bearing pads
Keels
PLCs

Our in-house technicians are capable of design, manufacture or service of complex PLC systems to basic system service on items such as:

  • electrical motors
  • GPS
  • alarm and monitoring systems

We specialise in the supply and repair of hydraulic pumps and motors from all manufacturers using genuine parts. We are able to supply a full service test report using the latest computerised technology and in-house test benches.

Pumps
Steering

Whether its routine maintenance, repairs or upgrades, our technicians have the skill and knowledge to handle all your yacht steering system needs. These include hydraulic, electrical and mechanical components.

Superyacht Hydraulics can provide you with customised valve assemblies to fit your yacht system’s needs with a wide range of weight, finish, actuator, valve, and body style combinations. Our assemblies are designed to be plug and play at the time of installation. We work with leading designers capable of designing custom manifolds for Vang Control, Transom Door with free float, complex furling systems to full system valve solutions.

Valve Blocks
Captive Winches

We are experienced in servicing captive winches from multiple manufacturers such as Harken, Seaway Powell and Onboard Systems for yachts ranging from 40m to 80m with pull loads from 1.5 ton to 50 ton.

With support from the manufacturers, we ensure servicing is carried out to a factory standard.

Cylinders

We are experienced in servicing captive winches from multiple manufacturers such as Harken, Seaway Powell and Onboard Systems for yachts ranging from 40m to 80m with pull loads from 1.5 ton to 50 ton.

With support from the manufacturers, we ensure servicing is carried out to a factory standard.

Furling Systems

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Keels

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
PLCs

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Pumps

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Steering

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Valve Blocks

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Captive Winches

We are experienced in servicing captive winches from multiple manufacturers such as Harken, Seaway Powell and Onboard Systems for yachts ranging from 40m to 80m with pull loads from 1.5 ton to 50 ton.

With support from the manufacturers, we ensure servicing is carried out to a factory standard.

Cylinders

We are experienced in servicing captive winches from multiple manufacturers such as Harken, Seaway Powell and Onboard Systems for yachts ranging from 40m to 80m with pull loads from 1.5 ton to 50 ton.

With support from the manufacturers, we ensure servicing is carried out to a factory standard.

Furling Systems

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Keels

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
PLCs

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Pumps

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Steering

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Valve Blocks

We offer a range of services for furling systems which includes but is not limited to:

  • initial Inspection
  • replacement of seals and bearings
  • cleaning and NDT inspection
  • machining of parts needed for replacement
  • bench testing run
Ocean Marine Systems Logo
Rigpro Logo
Marine Hydraulic Consultancy logo u
Navtec logo
Harken logo
Sun Hydraulics logo